MD49 - 24V 5A dual H-bridge motor driver
Designed to work with our EMG49 gear motors, the MD49 will drive two motors.
Controllled by Serial Interface at 9600 or 38400 baud.
Two modes of operation, direct individual control of the motors or the ability to send a speed and a turn commands.
Voltage - 24v only.
Current - Up to 5A for each motor.
Encoder - Processes quadrature encoder inputs of 980 counts per wheel turn from the EMG49 motor.
Size - 109mm x 66mm
Features Under & Over votage protection, motor short circuit protection.
- Buy 5 for £48.88 £40.73 each and save 6%
- Buy 25 for £45.67 £38.06 each and save 13%
- Buy 100 for £42.68 £35.57 each and save 18%
Full MD49 Documentation
Arduino - control using the serial interface and display using the LCD05
PIC18F4410 - driving the motor and displaying variables on the LCD05
Picaxe18x - Serial communication example
Raspberry Pi- Use the serial port to drive the MD49 motors and display the encoder values